Table of Contents
Advertisement
English
process other materials, in particular steel,
concrete and mineral materials.
Materials containing asbestos must NOT be
processed.
Do not use cutting or abrasive wheels.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in
tended use.
3.1
Saw blades
Only use saw blades with the following dimen
sions:
–
Saw blades according to EN 847-1
–
Saw blade diameter 216 mm
–
Cutting width 2.3 mm
–
Locating bore 30 mm
–
Standard blade thickness 1.6 mm
–
Suitable for speeds of up to 5000 rpm
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
4
Technical data
Cordless compound
mitre saw
Motor voltage
Speed (idle) 1 x 18 V
Speed (idle) 2 x 18 V
Max. speed
[2]
Suitable battery packs
Max. mitre angle
Max. bevel angle
Weight excl. battery
pack
5
Parts of the device
[1-1]
Switch-on lock
[1-2]
On/off switch
[1-3]
Safety button
[1-4]
Handle
[1-5]
Lever for groove depth limit
[1-6]
Rotary knob for slide locking device
[2] Max. speed in the event of faulty electronics.
28
KSC 60 EB
18 - 2 x 18 V
1300–1800 rpm
1300–3500 rpm
5000 rpm
The illustrations specified are located at the be
Festool series
ginning and end of the operating instructions.
BP 18 ≥ 4 Ah
Accessories shown or described are not always
60° left/right
included in the scope of delivery.
47/46° left/right
6
17.1 kg
6.1
► Remove the transport safety device [3].
[1-7]
Lever for transport locking device
[1-8]
Spindle stop
[1-9]
Stop ruler (both sides)
[1-10] Extension table (both sides)
[1-11] Rotary knobs for securing the exten
sion table (both sides)
[1-12] Angle display for mitre cuts
[1-13] Lever for locking the mitre angle
[1-14] Rotary knob for securing the rotary
base
[1-15] Rotary base
[1-16] Pendulum guard
[2-1]
On/off switch for spot lighting
[2-2]
Button to remove battery pack
[2-3]
FSZ120 fastening clamp
[2-4]
Bevel holder for clamping the bevel
[2-5]
Bevel angle display
[2-6]
Star handle for securing the bevel an
gle
[2-7]
Carrying handle
[2-8]
Key storage box for the hex key
[2-9]
Extractor connector
[2-10] Battery pack capacity indicator
[2-11] Adjusting wheel for setting the speed
Commissioning
Initial commissioning
CAUTION
Risk of tilting!
► Ensure that the power tool is securely
positioned.
► If required, observe the installation in
structions for the MFT multifunction table
or underframe UG-KAPEX KS 60.
▷ Remove the protective sleeve from the
left-hand pulling rail
.
Advertisement
Table of Contents
