Advertisement
Quick Links
BEFORE YOU BEGIN
·
Please read these instructions carefully to
familiarize yourself with the required tools, materials,
and installation sequences. Follow the sections that
pertain to your particular installation. This will help
you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
·
All information is based on the latest product
information available at the time of publication.
Kohler China Ltd. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning,
and warranty information-
instructions for the consumer.
·
Please provide adequate available space for the
bath unit in accordance with rough-in. Arrange the
location of drain in advance.
IMPORTANT:
All installations must comply with council and local
authority by-laws. It is the responsibility of the installer
to ensure that the waste is made watertight by means
of silicone sealant or caulking compound.
NOTE:
The bath can be installed after the decoration of
the bathroom walls is finished. However, bath drain and
water pipe shall be pre-arranged.
PRODUCT REQUIREMENTS
A. Summary Of Key Requirements
·
Observe all local plumbing codes.
·
Install the unit to a level subfloor.
B. Plumbing Specifications
If using a rim-mounted bath faucet, flexible connections
between the valves and spout may be required.
Confirm adequate mounting, connection
specified faucet for your installation.
C. Product Inspection
Uncrate and inspect bath for damage. All Kohler s
baths have been manufactured with sophisticated
craftsmanship. However, please inspect for any
possible damage that may have occurred in transit.
Leave all materials in the crate during construction to
prevent damage.
1119528-T01-C
please leave these
space
of
'
·
·
·
·
A.
·
·
B.
C.
368
201419
-1-
INSTALLATION INSTRUCTIONS
FREESTANDING ACRYLIC BATH
K-18343T/K-18347T/K-18353T
Copyright Kohler China Ltd., 2010
EVOK
, 2010
Advertisement
Related Manuals for Kohler EVOK K-18343T
Summary of Contents for Kohler EVOK K-18343T
- Page 1 Confirm adequate mounting, connection specified faucet for your installation. C. Product Inspection Uncrate and inspect bath for damage. All Kohler s baths have been manufactured with sophisticated craftsmanship. However, please inspect for any possible damage that may have occurred in transit.
-
Page 2: Installation Requirements
NOTE: Damage occurred during transport or installation shall not be covered by warranty. D. New or Replacement Installation Requirements This bath can be installed in new or existing bathrooms. For replacement: Remove the old bath, and remove enough old wall material and floor covering from the area to allow for installation. -
Page 3: Before Installation
BEFORE INSTALLATION A. Protect the Bath Unit Cover the bath with a protective layer or similar material. Be careful not to scratch the bath surface. INSTALL THE BATH A. Put the bath at desired position 1. Adjust the feet under the bath to make it level. Adjust the height of the bath to the height marked in the Roughing-In. - Page 4 6. Apply lubricating oil both to the inner surface of the guide bush and the outer surface of the guide pin. Insert the guide pin into the guide bush to finally fix the bath onto the floor. Guide Pin Base Guide Bush B.
-
Page 5: Important Consumer Information
Remove and install the freestanding bath If the freestanding bath needs removing, please follow the steps below: Lift the bath levelly, then the guide pin could be pluged out of the guide bush. Then remove the nut on the drain tail pipe. Nut of the Drain Tail Pipe 2) When installing the freestanding bath, please first apply lubricating oil both to the inner surface of the...