Kohler EVOK K-18343T Installation Instructions page 4

6. Apply lubricating oil both to the inner surface of the
guide bush and the outer surface of the guide pin.
Insert the guide pin into the guide bush to finally fix the
bath onto the floor.
Base
B. Plumbing Installation
The drain has been installed onto the bath before it
leaves factory. Fill the bath with water before the bath
is securely positioned so as to check the connections
for leaks. Damage caused by negligence is not covered
by warranty.
Note: Be careful not to damage the bottom of the bath
and the subfloor.
1119528-T01-C
6.
B.
-4-
Guide Pin
Guide Bush