Planet GPN-400ACV Quick Start Manual

GPON HGU with 4-Port GbE, 1200Mbps
802.11AC Wireless and 2-Port FXS
GPN-400ACV
►
1. Package Contents
Thank you for choosing PLANET GPN-400ACV. Before installing the
router, please verify the following items in the package box.
GPON Wi-Fi ONU
If there is any item missing or damaged, please contact the
seller immediately.
Note
3. Hardware Installation
Step 2: Follow the figure below to connect the network devices.
Power
GPON OLT
PON
Quick Guide
12V DC,
1A Power Adapter
– 1 –
RJ45
PC/Laptop
PON
Passive Optical Network
Splitter
– 3 –
2. Hardware Introduction
Front View
3. Hardware Installation
Step 1: Connect the Power Adapter provided in the package to the
GPN-400ACV. The Power LED on the front panel will turn on
accordingly.
Power
4. Network Configuration (Windows 10)
A computer with a wired Ethernet connection is required for the
first-time configuration of the Wireless Router.
1. Click the "Start" button located at the lower-left corner of your
computer.
2. Click "Settings".
3. Double-click the "Network & Internet" icon.
4. Click "Change Adapter Options".
5. Double-click "Local Area Connectio".
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and click
"Properties".
7. Select "Obtain an IP Address automatically" and "Obtain DNS
Server Address automatically", and then click the "OK" button
twice to save the configuration.
– 2 –
– 4 –