Timeline; Chronograph; Basic Operations; Start The Chronograph - Timex IRONMAN Data Link USB User Manual

Timex Data Link USB Watch User Guide

Timeline

The timeline feature, which is activated with the PC software (see the Software Help for more
information), displays a row of seven dashes above the time. The first dash on the left indicates
the current day, with the others representing the following six days. A block indicates that an
Occasion is set for that day. In the example, today and the fourth day from today have
occasions.

Chronograph

This mode allows you to record the elapsed time of an event. The duration of an individual lap
(lap time) and the total time for a number of laps (split time) can be displayed, stored in
memory, and recalled.
When this mode is entered, the display shows the number of laps that can be stored in the
remaining Memory; if none is available, the second message appears.
Then the display shows the current state of the chronograph, which can be either reset (shown),
stopped, or running.

Basic Operations

The functions you can perform while in Chronograph mode are as follows.

Start the Chronograph

To start timing a new workout, with the display reset, press START/SPLIT. The chronograph
icon blinks continuously as long as the chronograph is running. The total time is displayed as
shown, as MM.SS hh (minutes, seconds, hundredths of a second) for times less than 1 hour and
as HH:MM SS (hours, minutes, seconds) for times greater than an hour, up to 100 hours.
7