Clock Operation; Manually Setting The Clock; Time Display - JVC MX-DN550 Instruction Manual

Clock Operation

Manually Setting the Clock

Manual setting the clock can only be done in Standby mode.
1. In Standby mode, press and hold CLK button.
2. Press /
3. Press the CLK button, hour indicator will blink.
4. Press /
5. Press the CLK button, minute indicator will blink.
6. Press /
7. Press the CLK button to confirm.
• To exit timer setting mode without storing, press the
• If no button is pressed in approx 90 seconds, the unit exits clock setting mode automatically.
• If a power failure occurs or the unit is disconnected from the mains, the clock setting will be lost.

Time Display

While the unit is on, press CLK button to display the clock for few seconds.
16
or / button to set the 12/24 hour format.
or / button to set the hour.
or / button to set the minute.
button.