Fiat 500X 2021 Owner's Manual page 105

Adaptive Cruise Control (ACC) Operation
The Cruise Control buttons (located on the right
side of the steering wheel) operate the ACC
system.
Adaptive Cruise Control Buttons
1 — SET (+)/Accel
2 — CANC/Cancel
3 — SET (-)/Decel
4 — Distance Setting Decrease
5 — Adaptive Cruise Control (ACC) On/Off
6 — Fixed Speed Cruise Control On/Off
7 — RES/Resume
8 — Distance Setting Increase
Adaptive Cruise Control (ACC) Menu
The instrument cluster display shows the
current ACC system settings. The information it
displays depends on ACC system status.
Push the Adaptive Cruise Control (ACC) on/off
button until one of the following shows in the
instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Adaptive Cruise Control Set
When the SET (+) or the SET (-) button is
pushed, the display will read "ACC SET."
When ACC is set, the set speed will appear in
the instrument cluster display.
The ACC screen may display once again if any of
the following ACC activity occurs:
System Cancel

Driver Override

STARTING AND OPERATING
System Off

ACC Proximity Warning

ACC Unavailable Warning

The instrument cluster display will return to the
last display selected after five seconds of no
ACC display activity
Activating Adaptive Cruise Control (ACC)
The minimum set speed for the ACC system is
20 mph (32 km/h).
When the system is turned on and in the ready
state, the instrument cluster display will read
"ACC Ready."
When the system is off, the instrument cluster
display will read "Adaptive Cruise Control (ACC)
Off."
NOTE:
You cannot engage ACC under the following
conditions:
When in 4WD Low

When the brakes are applied

When the parking brake is applied

103
4