Epson PowerLite EB-L200SX User Manual page 200

Setting
Gamma
RGBCMY
Reset to Defaults
Note: The Brightness setting does not affect laser brightness. To change the laser brightness mode,
use the Light Source Brightness Control setting in the Operation menu.
Input Source Settings
To change settings for an input source, make sure the source is connected and select that source.
Note: You can restore the default settings of the Tracking, Sync, and Position settings by pressing the
Auto button on the remote control.
Setting
Source
Resolution
Aspect
Scale
Options
–2 to 2
Custom
Varying levels available
—
Options
—
Auto
Normal
Wide
See the list of available aspect
ratios
Varying levels available
200
Description
Adjusts the colors by selecting
one of the gamma correction
values or referring to a gamma
graph
Adjusts the hue, saturation, and
brightness for each color
Resets all settings for the Color
Mode currently selected
Description
Displays the current input source
selected
Sets the VGA input signal
resolution if not detected
automatically using the Auto
option (only for computer inputs)
Sets the aspect ratio (width-to-
height ratio)
Turn off the Scale setting or set
the Scale Mode setting to Full
Display before selecting this
setting.
When using multiple projectors,
adjusts the scale of the image
displayed by each projector