Something Not Working - Zanussi ZCM930X Instruction Booklet

If the appliance is not working correctly, please carry out the following checks, before contacting your local
Service Force Service Centre.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by
incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Symptoms
1. No burner ignition
2. The gas ring burns unevenly
3. The oven does come on
4. Cooking results are not satisfactory
5. The oven smokes
6. The oven does not work
If after these checks, the appliance still does not operate correctly, contact your local Service Force
Centre. When you contact the Service Centre, they will need the following information:
1 Your name, address and postcode.
2 Your telephone number
3 Clear and concise details of the fault
4 The model and serial number (see rating plate*)
5 Date of purchase
* The rating plate can be found on the front flap of the storage compartment.
18

SOMETHING NOT WORKING

Check that:
·
·
·
·
Check that:
·
·
Check that:
·
Check that:
·
·
Check that:
·
·
·
Check that:
·
·
·
Solutions
Gas supply is completely open
The position of gas pipe is right
The burner is not wet
The burner cap and ring burner have been
replaced correctly after cleaning
The main jet is not blocked and the ring
burner is clean of food particles
The burner cap and ring burner have been
replaced correctly after cleaning
a cooking function/temperature have been
selected;
the thermostat is placed correctly;
the cooking time is adapted;
the oven does not need cleaning;
the meal does not overflow;
there is no excessive fat / juice projection on
the oven sides.
the appliance is not unplugged;
there is no power break.
the fuse connections are intact.