Nortel Meridian 1 General Maintenance Information page 52

Page 52 of 72 Software maintenance tools
553-3001-500 Standard 15.00
Note: Software Audit (LD 44) should always be used in the Background
Routine.
Table 6
Programs used in Midnight and Background Routines
Program number
LD 30
LD 32 (Midnight only)
LD 33
LD 34
LD 35 (see Note 1)
LD 36
LD 37 (see Note 1)
LD 38
LD 40
LD 41
LD 43 (Midnight only)
LD 44
LD 45
LD 46
LD 60 (Midnight only)
LD 61 (Midnight only)
Note 1: For Option 51C, 61C, 81, and Option 81C, use LD 135 instead of LD 35.
Use LD 137 and LD 37.
Note 2: LD 43 will automatically be activated during midnight routines if changes
have been made within the past 24 hours.
January 2002
Program function
Network and Signaling Diagnostic
Network and Peripheral Equipment Replacement
1.5 Mbyte Remote Peripheral Equipment
Diagnostic
Tone and Digit Switch and Digitone Receiver
Common Equipment Diagnostic
Trunk Diagnostic 1
Input/Output Diagnostic
Conference Circuit Diagnostic
Call Detail Recording Diagnostic
Trunk Diagnostic 2
Data Dump (see Note 2)
Software Audit
Background Signal and Switching Diagnostic
Multifrequency Sender Diagnostic for ANI
Digital Trunk Interface Diagnostic
Message Waiting Lamps Reset