Nortel Meridian 1 General Maintenance Information page 17

System messages are codes with a mnemonic and number, such as PWR0014.
The mnemonic identifies an overlay program or a type of message. The
number identifies the specific message. Table 1 gives an example of the
format for a system message.
Table 1
System message format
System message:
PWR0014
PWR
0014
With options 51C, 61C, 81, and 81C, system messages generated from the
Core Common Equipment Diagnostic (LD 135) and the Core Input/Output
Diagnostic (LD 137) include the interpretation and any action required. For
example, if a CPU test from LD 135 fails, the message displayed is
"CCED200 CPU test failed Check the CP card."
See Administration (553-3001-311) for a description of all maintenance
commands, and System Messages (553-3001-411) for the interpretation of all
system messages.
Communicating with the system
Interpretation
This message (generated by the system
monitor) indicates power and temperature
status or failures.
This message means the system monitor failed
a self-test.
Meridian 1 General Maintenance Information
Page 17 of 72