Sharp MX-7081 Start Manual page 4

When moving the machine, switch off the main
power and remove the power plug from the outlet
before moving.
The cord may be damaged, will create a risk of fire or
electrical shock.
Installation notes
CAUTION
Do not install the machine on an unstable or
slanted surface. Install the machine on a surface
that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
If peripheral devices are to be installed, do not install
on an uneven floor, slanted surface, or otherwise
unstable surface. Danger of slippage, falling, and
toppling. Install the product on a flat, stable surface
that can withstand the weight of the product.
Do not install the equipment on a stand made of
glass.
Do not install in a location with moisture or dust.
Risk of fire and electrical shock.
If dust enters the machine, dirty output and machine
failure may result.
Locations that are excessively hot, cold, humid, or
dry (near heaters, humidifiers, air conditioners, etc.)
The paper will become damp and condensation may form
inside the machine, causing misfeeds and dirty output.
If the location has an ultrasonic humidifier, use pure
water for humidifiers in the humidifier. If tap water is
used, minerals and other impurities will be emitted,
causing impurities to collect on the inside of the
machine and create dirty output.
When the machine is installed, the adjusters must
be lowered to the floor to secure the machine
(prevent it from moving).
Rotate the adjusters in the locking direction until they
are in firm contact with the floor.
If you find it necessary to reposition the machine
due to rearrangement of your office layout or
other reason, retract the adjusters from the floor,
turn off the power, and then move the machine.
(After moving the machine, lower the adjusters again
to secure the machine.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output
may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine
may cause dirty output.
4
Do not install the machine in a location with poor air
circulation.
A small amount of ozone is created inside the machine
during printing. The amount of ozone created is not
sufficient to be harmful; however, an unpleasant odor
may be noticed during large copy runs, and thus the
machine should be installed in a room with a ventilation
fan or windows that provide sufficient air circulation. (The
odor may occasionally cause headaches.)
* Install the machine so that people are not directly
exposed to exhaust from the machine. If installed near
a window, ensure that the machine not be exposed to
direct sunlight.
Near a wall
Be sure to allow the
required space around
the machine for servicing
and proper ventilation.
(The machine should be
no closer than the
distances indicated below from walls.)
Locations subject to vibration.
Vibration may cause failure.
The machine includes a built-in local drive. Do not
subject the machine to shock or vibration. In particular,
never move the machine while the power is on.
• The machine should be installed near an accessible
power outlet for easy connection.
• Connect the machine to a power outlet which is not
used for other electric appliances. If a lighting fixture
is connected to the same outlet, the light may flicker.
About consumables
CAUTION
Do not throw a toner cartridge into a fire.
Toner may fly and cause burns.
Store a toner cartridge out of the reach of children.
Handling precautions
WARNING
Do not place a container of water or other liquid, or a
metal object that might fall inside, on the machine.
If the liquid spills or the object falls into the machine,
fire or electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause
electrical shock.
30cm
Machine
30cm
45cm