Table of Contents
Advertisement
When the oven is first installed
Remove all packaging, both inside and outside
the oven, before using the oven.
When the oven is first connected to the electrical supply,
the display will automatically show 12:00 and the
symbol
will flash.
Ensure the correct time of day is set before using the
oven.
To set the correct time of day :
a) press button
and, while the symbol
(Fig. 1), set the correct time of day by pressing
buttons "
" or " " (Fig. 2).
The time arrow symbol
seconds after the correct time is displayed (Fig. 3).
b) if the symbol
is not flashing anymore, press
button
twice.
Then, proceed as described in point a).
Before first use, the oven should be heated without food.
To do that, proceed as follows:
— press button
to switch on the oven.
— press button
"Conventional Cooking" function
— set the temperature to 250 °C using the increasing
push button " ".
— Allow the oven to run empty for approximately 45
minutes.
— open a window for ventilation.
This procedure should be repeated with the "Fan
Cooking"
and "Full Grill"
approximately 5-10 minutes.
During this time, an unpleasant odour may be
emitted. This is absolutely normal, and is
caused by residues of manufacturing.
Once this operation is carried out, let the oven
cool down, then clean the oven cavity with a
soft cloth soaked in warm soapy water.
Before cooking for the first time, carefully wash
the shelf and the dripping pan.
To open the oven door, always catch the
handle in its central part (Fig. 5).
is flashing
will come off about 5
twice and select the
(Fig. 4).
function for
B
Fig. 1
B
Fig. 2
B
Fig. 3
B
Fig. 4
Fig. 5
5
Advertisement
Table of Contents
