When The Oven Is First Installed - Zanussi FM 5611 Instructions For The Use And Care

When the oven is first installed
Once the oven is installed it is important
to remove the protective materials which
were put on in the factory.
Remove from these parts the plastic film,
then wipe with a cloth dipped in
methylated spirit
Switch the oven control to MAX and
leave it to run empty for 30 minutes to
bum off any other protective materials.
This will also remove any unpleasant new
smells.
The oven is evenly heated throughout.
A fan in the back wall distributes heated
air round the food during cooking so that
everything cooks in approximately the
same time regardless of where it is
placed in the oven.
Foods of different types, provided they
require the same cooking temperature
can be cooked together and there is little
possibility of flavour transference.
Cooling fan
The cooling fan is designed to cool the
walls and the components of the oven
itself.
The fan switches on automatically when
the oven control knob is turned on.
Warm air is blown out through the
aperture near the oven door handle.
Technical data
Model Number: FM 5611 - FM 9611
Recess dimensions
Height
Width
Depth
Oven capacity
580 mm
560-570 mm
550 mm
1.9 cu.ft
Internal oven dimensions
Height 32 cm
Width 42 cm
Depth 39 cm
Oven ratings
Traditional system 2.0 kW
Convection system 2.5 kW
Convection fan 25 W
Grill element 2.0 kW
Double grill element 3.0 kW
Oven lamp 15 W
Cooling fan 25 W
Total rating 3.040 kW
5