Chapter 3
3 11
Administration
3 11 1
LAN IP Address
Follow the steps below to configure LAN settings of the extender.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to
Device Settings
LAN Type:
Select
Obtain an IP address automatically
obtain IP Address from the main router. Select
configure the LAN parameters.
IP Address:
The IP address of the powerline extender.
Subnet Mask:
The subnet mask associated with IP address.
Gateway:
The IP address of the gateway device.
Primary DNS:
Input the DNS IP address provided by your ISP.
Secondary DNS:
Input the IP address of another DNS server if your ISP provides two
DNS servers.
3 11 2
Set Up System Time
System time is the time displayed while the extender is running. The system time you
configure here will be used for other time-based functions like Parental Controls and
Wi-Fi Schedules. You can manually set how to get the system time.
Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the username and password you set for the extender.
Go to
Settings
>
Time Settings
>
LAN
Settings.
page.
Configuring via Web Management Interface
to have your extender automatically
Use the following IP address
to manually
25