C ontrols
Combination Switch
1
Low beam (turn lighting switch
clockwise two notches)
2
High beam (turn lighting switch
clockwise two notches)
3
Headlamp flasher (high beam
available independent of lighting
switch position)
4
Turn signals, right
5
Turn signals, left
Tooperate theturn signals, move the
combination switch past the point of
resistance (up or down). The switch is
automatically cancelled when the
steering wheel is turned by a large
enough angle.
To signal minor directional changes of
the vehicle, such as changing lanes on
a highway, move combination switch
to the point of resistance only and
hold it there.
6
Control for windshield washer
system
When the washer system is
switched on, the wipers also
operate
7 Windshield wiper control
0
Windshield wiper switched off
1
Intermittent wiping
II
Normal wiper speed
III
High wiper speed
Hints:
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds atafaster sequence than un
der normal operating conditions.
Fog lamps will only operate together
with low beam headlamps. Fog lamps
are turned off automatically when
lighting switch is returned to off-
position.