Table of Contents
Advertisement
Fastening of front and rear outer
seat belts (with inertia reel):
•
Pull belt with tongue (1) across
shoulder and lap. The belt must
not be twisted and must be
tight.
•
Press tongue (1) into buckle (2)
and allow to engage audibly.
Unfastening, front and rear:
•
Depress red button (3)
in buckle (2).
•
Return tongue (1) to initial
position.
Fastening of rear center belt
(without inertia reel):
•
Pull belt across the lap. It must
not be twisted and must be
tight.
•
Press tongue into buckle and
allow to engage audibly.
Adjustment of rear center seat belt:
To lengthen, turn belt buckle (on
LH side of belt) to be at right angles
to the belt and pull the tongue.
To shorten, pull loose end of belt.
Operation of belts with
inertia reel:
The safety belt inertia reel stops the
belt from unwinding further in caseof
vehicle deceleration in any direction
or if the belt is pulled out quickly.
Functional test:
The locking function of the inertia reel
can be tested by braking, driving
around a bend or by pulling the belt
out quickly.
Seats
4
17
Advertisement
Table of Contents
