NordicTrack RW200 User Manual page 9

8. See drawing 8a. Plug the Power Adapter (108)
into the receptacle on the frame of the rower.
Note: To plug the Power Adapter (108) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 10.
See drawing 8b. The Console (75) can also be
operated with four D batteries (not included);
alkaline batteries are recommended. Do not use
old and new batteries together or alkaline, stan-
dard, and rechargeable batteries together.
Remove the screws (A) and the battery cov-
ers (B), insert batteries into the battery
compartments, and then reattach the battery
covers. Make sure to orient the batteries as
shown by the diagrams inside the battery
compartments.
9. Make sure that all parts are properly tightened before you use the rower. Extra parts may be included.
Place a mat under the rower to protect the floor.
8a
8b
B
A
9
108
75