Download Print this page
Empire Comfort Systems LS40STB Installation Instructions Manual
Empire Comfort Systems LS40STB Installation Instructions Manual

Empire Comfort Systems LS40STB Installation Instructions Manual

Log set

Advertisement

Quick Links

INSTALLER:
Leave this manual with the appliance.
CONSUMER:
Retain this manual for future reference.
WARNING
FIRE OR EXPLOSION HAZARD
Failure to follow safety warnings exactly
could result in serious injury, death, or
property damage.
— Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch;
do not use any phone in your building.
Leave the building immediately.
Immediately call your gas supplier
from a neighbor's phone. Follow
the gas supplier's instructions.
If you cannot reach your gas
supplier, call the fire department.
— Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.
INSTALLATION INSTRUCTIONS
(SEE HOMEOWNER MANUAL FOR OPERATING INSTRUCTIONS)
LOG SET
MODEL LS40STB
For Use With
DVCT40SP Fireplaces
NOTICE: Ceramic logs may differ in appearance
from those shown in this manual.
If not installed, operated and maintained
in accordance with the manufacturer's
instructions, this product could expose you
to substances in fuel or from fuel combustion
which can cause death or serious illness.
GAS-FIRED
WARNING
Page 1

Advertisement

loading

Summary of Contents for Empire Comfort Systems LS40STB

  • Page 1 INSTALLATION INSTRUCTIONS (SEE HOMEOWNER MANUAL FOR OPERATING INSTRUCTIONS) INSTALLER: LOG SET GAS-FIRED MODEL LS40STB Leave this manual with the appliance. CONSUMER: For Use With Retain this manual for future reference. DVCT40SP Fireplaces WARNING FIRE OR EXPLOSION HAZARD Failure to follow safety warnings exactly could result in serious injury, death, or property damage.
  • Page 2 EMBER IDENTIFICATION DVCT40 FRONT PART# 40747 Ember (1) Ember (1 40748 Ember (2) Ember (2) 40749 Ember (3) Ember (3) 40750 Ember (4) Ember (4) 40751 Ember (5) Ember (5) 40752 Ember (6) Ember (6) USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. Attention: When ordering parts, it is very important that part number and description of part coincide.
  • Page 3 LOG IDENTIFICATION DVCT40 FRONT PART# 40753 Log (A) Log (A) 40754 Log (B) Log (B) 40755 Log (C) Log (C) 40756 Log (D) Log (D) 40757 Log (E) Log (E) 40758 Log (F) Log (F) 40759 Log (G) Log (G) USE ONLY MANUFACTURER’S REPLACEMENT PARTS.
  • Page 4 LOG IDENTIFICATION DVCT40 FRONT PART# 40760 Log (H) Log (H) 40761 Log (I) Log (I) 40817 Log (J) Log (J) 40818 Log (K) Log (K) 40819 Log (L) Log (L) 40820 Log (M) Log (M) 40821 Log (N) Log (N) 36747 Coals (100) USE ONLY MANUFACTURER’S REPLACEMENT PARTS.
  • Page 5 LOG AND EMBER PLACEMENT NOTE: Install liners before logs. See separate Liner Installation Burner Pin Location manual for details. CAUTION Do not handle these logs with your bare hands. Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash your hands gently with soap and water to remove any trace of fibers.
  • Page 6 LOG AND EMBER PLACEMENT Place Ember (1) onto burner base and onto one pin as shown. REAR Page 6 41016-1-0820...
  • Page 7 LOG PLACEMENT Place Ember (2) onto burner base and onto two pins as shown. REAR 41016-1-0820 Page 7...
  • Page 8 LOG PLACEMENT Place Ember (3) onto burner base and onto two pins as shown. REAR Page 8 41016-1-0820...
  • Page 9 LOG PLACEMENT Place Ember (4) onto burner base and onto two pins as shown. FRONT 41016-1-0820 Page 9...
  • Page 10 LOG PLACEMENT Place Ember (5) onto burner base and onto two pins as shown. FRONT Page 10 41016-1-0820...
  • Page 11 LOG PLACEMENT Place Ember (6) onto burner base and onto one pin as shown. FRONT 41016-1-0820 Page 11...
  • Page 12 LOG PLACEMENT Place decorative rocks across burner base in front of the outer burner tube. Do not cover the burner tube ports. REAR FRONT Page 12 41016-1-0820...
  • Page 13 LOG PLACEMENT Place the Glowing Embers on the burner tubes covering all ports. REAR FRONT 41016-1-0820 Page 13...
  • Page 14 LOG PLACEMENT Place Log (A) onto two pins of Ember (B) as shown. REAR Page 14 41016-1-0820...
  • Page 15 LOG PLACEMENT 10. Place Log (B) onto two pins of Ember (B) as shown. REAR 41016-1-0820 Page 15...
  • Page 16 LOG PLACEMENT 11. Place Log (C) onto two pins of Ember (C) as shown. REAR Page 16 41016-1-0820...
  • Page 17 LOG PLACEMENT 12. Place Log (D) onto two pins of Embers (C) and (D) as shown. FRONT 41016-1-0820 Page 17...
  • Page 18 LOG PLACEMENT 13. Place Log (E) onto one pin of Ember (D) as shown. FRONT Page 18 41016-1-0820...
  • Page 19 LOG PLACEMENT 14. Place Log (F) onto one pin of Ember (E) as shown. FRONT 41016-1-0820 Page 19...
  • Page 20 LOG PLACEMENT 15. Place Log (G) onto one pin of Ember (D) as shown. FRONT Page 20 41016-1-0820...
  • Page 21 LOG PLACEMENT 16. Place Log (H) onto one pin of Ember (E) as shown. FRONT 41016-1-0820 Page 21...
  • Page 22 LOG PLACEMENT 17. Place Log (I) onto two pins of Ember (A) and Log (A) as shown. REAR Page 22 41016-1-0820...
  • Page 23 LOG PLACEMENT 18. Place Log (J) onto two pins of Ember (C) and Log (H) as shown. REAR 41016-1-0820 Page 23...
  • Page 24 LOG PLACEMENT 19. Place Log (K) onto one pin of Log (J) as shown. REAR Page 24 41016-1-0820...
  • Page 25 LOG PLACEMENT 20. Place Log (L) onto previous assembly as shown. FRONT 41016-1-0820 Page 25...
  • Page 26 LOG PLACEMENT 21. Place Log (M) onto previous assembly as shown. FRONT Page 26 41016-1-0820...
  • Page 27 LOG PLACEMENT 22. Place Log (N) onto previous assembly and against liner as shown. FRONT 41016-1-0820 Page 27...
  • Page 28 LOG PLACEMENT 23. Log set assembly is complete. Place additional decorative rocks and embers in any empty areas around the burner base as desired. FRONT Page 28 41016-1-0820...
  • Page 29 LOG PLACEMENT 24. Log set assembly is complete. Place additional decorative rocks and embers in any empty areas around the burner base as desired. REAR 41016-1-0820 Page 29...
  • Page 30 FIREPLACE SERVICE HISTORY Date Dealer Name Service Technician Name Service Performed/Notes Page 30 41016-1-0820...
  • Page 31 This list changes from time to time. For the current list, please click on the Master Parts button at www.empirecomfort.com. Please note: Master Parts Distributors are independent businesses that stock the most commonly ordered Original Equipment repair parts for Heaters, Grills, and Fireplaces manufactured by Empire Comfort Systems Inc. Dey Distributing F.
  • Page 32 Empire Comfort Systems Inc. Belleville, IL If you have a general question about our products, please e-mail us at info@empirecomfort.com. If you have a service or repair question, please contact your dealer. www.empirecomfort.com Page 32 41016-1-0820...