How To Install Homepatrol-2 Sensnel Sodware - Uniden HomePatrol-2 Owner's Manual

How to Install HomePatrol-2 Sentinel Software
If you have not already installed HomePatrol-2 SenSnel sodware, follow these procedures.
1. Use the USB cable to connect HomePatrol-2 to your PC.
2. Turn on HomePatrol-2 if it is not already on. Select Mass Storage. The HomePatrol-2 screen turns
white while it is connected to the PC.
3. SenSnel sodware installaSon should begin immediately. If it does not, open the drive folder and
run Setup.exe in the Setup folder.
4. When installaSon is complete, SenSnel sodware and various documents are installed on your
PC.
5. Disconnect the USB cable. HomePatrol-2 begins iniSal setup procedures.
25