Zanussi Electrolux ZSF 6171 User Information page 14

Activating rinse aid inflow
when 3in1 function is selected
3
If the 3in1 function is not selected, the rinse
aid inflow is always activated.
If the 3in1 function is selected due to the use of 3in1
detergent, the rinse aid inflow is deactivated. If the
dishes then do not dry sufficiently, you should re-ac-
tivate the rinse aid inflow (see also section "Using
3in1 detergents").
1. Press the ON/OFF button.
3
If the LED indicator of only one programme
button is illuminated, this wash programme
has been activated. The wash programme
must be deselected:
Press function buttons 1 and 2 simultaneously
for approx. 2 seconds.
The LED indicators of all the programme but-
tons that can be selected will illuminate.
2. Press function buttons 1 and 2 simultaneously and
hold them down.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
Rinse aid inflow deactivated when
0d
3in1 on (factory setting)
Rinse aid inflow activated when 3in1
1d
on
4. Pressing function button 2 activates and deacti-
vates the rinse aid dispensing function.
5. Once the multi-display is indicating the required
setting, press the ON/OFF button. The setting is
now saved.
14