Washing Programmes - Zanussi ZSF2450 User Manual

1)
1)
1) The indicator light is off when a washing programme operates.
Delay start button
Use the delay start button to delay the start of
the washing programme with an interval between
1 and 19 hours. Refer to the chapter 'Setting and
starting a washing programme'.
Digital display
The display shows:
• Adjusted level of the water softener.
• Programme duration.
• Remaining time to the end of the programme.
• End of a washing programme.
• Number of hours in delay start.
• Fault codes.
Function buttons
Use the function buttons for these operations:

Washing programmes

4
Indicator lights
The indicator light comes on when the washing
phase or the rinsing phase operates.
The indicator light comes on when the drying
phase operates.
The indicator light comes on when the washing
programme is completed.
The indicator light comes on when it is necessary
to fill the salt container. Refer to the chapter 'Use
of dishwasher salt'.
The salt indicator light can stay on for some
hours, but it does not have an unwanted effect
on the operation of the appliance.
The indicator light comes on when it is necessary
to fill the rinse aid. Refer to the chapter 'Use of
rinse aid'.
• To set the water softener. Refer to the chapter
'Setting the water softener'.
• To cancel the washing programme in progress
or a delay start in progress. Refer to the chapter
'Setting and starting a washing programme'.
Setting mode
The appliance is in setting mode when all pro-
gramme indicator lights are on.
The appliance must be in setting mode for these
operations:
– To set a washing programme.
– To set the water softener level.
If a programme indicator light is on, cancel the
programme to go back to the setting mode. Refer
to the chapter "Setting and starting a washing
programme".