Zanussi ZSF2450 User Manual page 12

1
2
1
3
1
2
5
Put the filters back.
Turn the microfilter
clockwise to lock it.
Cleaning the spray arm
Regularly examine the spray arm. Remove re-
maining food from the holes in the spray arm.
Do these steps to remove and to put the spray
arm back:
12
A
B
2
Remove the filters A
and B from the bottom
of the appliance.
4
Fully clean the filters
below running water.
1
3
External cleaning
Clean the external surfaces of the appliance and
control panel with a damp soft cloth. Only use
neutral detergents. Do not use abrasive products,
scouring pads or solvents (acetone, trichloro-
ethylene etc...).
Frost precautions
Caution! Do not install the appliance where
the temperature is below 0 °C. The
manufacturer is not responsible for damage
because of frost.
If not possible, empty the appliance and close the
door. Disconnect the water inlet hose and re-
move water from the water inlet hose.
Long periods of non-operation
Do these steps when you do not use the appli-
ance for a long period:
1. Disconnect the mains plug from the mains
socket.
2. Close the water tap.
3. Keep the door open to prevent unpleasant
smells.
4. Keep the inner side of the appliance clean
(filters especially).
2