Additional Features - Electrolux Kelvinator KSV Series User Manual

OPERATING INSTRUCTIONS
4 Temperature indicator
A) Displays the temperature settings.
When you change the setting temperature, the
indicator begins to flash, and stops 20
seconds after temperature has been set.
B) Displays the room temperature when the
air conditioner is in FAN only mode.
C) When the unit stops operation, the indicator
returns to original factory settings.
D) Displays the malfunction code or protection
code.

Additional features

Sleep mode:
This function enables the unit to automatically
increase (cooling) or decrease (heating) setting
O
by 1 C per hour for the first two hours, then hold
steady for the next 5 hours, after such time the unit
will stop operation. Enables unit to maintain the most
comfortable temperature and save energy.
Auto-Restart function:
When there is a power failure to the unit, after
power is restored, the unit automatically returns
to the original function settings.
CLEAN AIR function (If applicable)
Air quality is the key to comfort, this air
conditioner may be equipped with Ionizer or
Plasma Dust Collector (Depending on models).
Ionizer can generate abundant anions to fill
the room with refreshing and natural air. Your
whole family will enjoy natural, pure and
healthy air everyday. The Plasma Dust
Collector can generate an ionization zone.
The air is passed through a plasma field as it passes
the high voltage ion generator 95% of the
dust, smoke, and pollen particles are attracted
to the electrostatic filter.
Operation Frequency display
5
This display is separated into five zones.
The zones illuminate based on the
compressors operating frequency. For
example, higher frequency will illuminate
more zones.
Easy-cleaned panel:
The front panel may be easily removed
for periodic cleaning.
Self-diagnosis and Auto-protection
Function:
This function can electronically detect any
errors and display the diagnosis by a series
of flashing LED's on the indoor unit. When
this occurs, the unit will automatically
switch to protection mode.
Feel function (If applicable)
The remote control serves as a remote
thermostat allowing for the precise
temperature control at its location.
To activate the Feel feature, point
the remote control towards the unit and
press the Feel button. T
display is actual temperature at its location.
The remote control will send this signal to
the air conditioner every 3 minutes interval
until you press the Feel button again.
If the unit does not receive the Feel
signal during any 7 minute interval, the
unit will beep to indicate the Feel
mode has ended.
7
he remote
19