Kawai ES920 Owner's Manual page 25

3. Adjusting the Reverb settings (type/depth/time)
While the reverb settings menu is shown, to change the reverb type:
Press the or VALUE buttons to cycle through the different
reverb types.
To change the reverb depth:
Press the or MENU buttons to select the "Reverb Depth"
page, then press the or
increase the reverb depth setting.
* The reverb depth setting can be adjusted within the range of 1~10.
To change the reverb time:
Press the or MENU buttons to select the "Reverb Time"
page, then press the or
increase the reverb time setting.
* The reverb time setting can be adjusted within the range of 1~10.
To exit the reverb settings menu and return to normal playing
mode, press the EXIT button or wait 10 seconds.
* Reverb settings are independent for each sound variation.
* Any changes made to the reverb type, settings, or on/off status will
remain until the power is turned off.
* Preferred reverb settings can be stored to a Registration memory for
convenient recall. Please refer to page 36 for more information.
VALUE buttons to decrease or
VALUE buttons to decrease or
Example: To change the reverb type from "Small
Hall" to "Concert Hall", press the VALUE
Example: To increase the reverb depth, press the
MENU button to select the "Reverb Depth" page,
then press and hold the VALUE button.
Example: To reduce the reverb time, press the MENU
button to select the "Reverb Time" page, then
press and hold the VALUE button.
button.
25