Safety Precautions - Haier HWM180-M1990DD Owner's Manual

Safety precautions

Warning
A separate, earthed power socket is
required for the power supply. Hold the
plug-NOT the electric cable-when
unplugging the washing machine. Do not
insert or remove the power plug with
wet hands. The power plug should be
accessible after the machine installation.
Forbidden
Do not install this appliance in a damp
or wet environment. Do not leave wet
laundry on the Control Panel or spray
water directly on to this appliance,as
this may cause the washer to
malfunction
or cause an
electrical
fault.
If you are using an extension cord or a
portable electrical outlet device (not
recommended), ensure that it is
positioned so that it does not come into
contact with water
or moisture
The openings must not be obstructed by a carpet
Ensure the plug is removed and the
taps turned off in the followng cases:
Power failure, cleaning, moving,
installation and when not in use.
Do not connect to hot water higer than
50°C temperature.
Do not wash water-proof clothing as
this may affect load balance
during spin cycle(s).