Haier HWM180-M1990DD Owner's Manual page 12

Child Lock function
The function is intended for children safety and preventing the washing program from accidental changes
by children.
Push down the Power button, set the desired washing program,after setting, push down the "Start/Pause"
button, then hold the "Soil Level" button and "Spin Speed" button, The digitron displays "CL", the child lock
function is activated. All of the buttons are locked, and can not make selection.
Release the child lock function: push down "Soil Level" button and "Spin Speed" button at the same time
for more than 3 seconds. After three beep sound, the child lock function is release.
Digital tube
During working , it displays the remained reserve time (minute).In case of
trouble, it displays the abnormal symbol (see to page 15)
During reserve, it displays the remained reserve time (hour).
" Power " button
Push the " Power " button 3s to switch on the power.
Under power-on mode, push it 3s to switch off the power.
If the "Start/Pause" button is not pushed, the machine will switch off the power
automatically after 5 minutes.
"Start/Pause" button
After the power is switched on, press it to start the machine.
During working, push it to pause.
During pause, push this button to restart and go on working.
A
C D E
F
Page 15
I
H