Zanussi ZIT64X User Manual page 7

The heat setting
Touch to increase the heat setting. Touch
crease the heat setting. The display shows the heat setting.
The automatic heat up function
The automatic heat up function adds more power to the
cooking zones and you can get a necessary heat setting
in a shorter time. The automatic heat up function starts
when you set a heat setting starting from
zone operates with the maximum power for some time
and than automatically switches back to the heat setting
you set.
If you set a higher heat setting during the automatic heat
up (for example from
adjusts.
If there is still residual heat on the cooking zone (display
), the automatic heat up does not start.
The time of the automatic heat up changes for different
heat settings:
Switching the Power function on and off
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 10 minutes at most. After that the induction cooking
zone automatically switches back to the highest heat set-
ting. To switch on, touch
off, touch or .
Power management
The power management di-
vides the power between two
cooking zones in a pair (see
the figure). The power func-
tion increases the power to
the maximum level for one
cooking zone in the pair and
automatically decreases in
the second cooking zone to
a lower power level. The display for the reduced zone
alternates.
Using the Timer
Use the timer to set how long the cooking zone operates
for one cooking session.
Set the timer after the selection of the cooking zone.
. A cooking
to ), the automatic heat up
, comes on. To switch
Touch and
cooking zone.
to de-
11
10
9
8
7
6
5
4
3
2
1
0
1
You can set the heat setting before or after you set the
timer.
• Selection of the cooking zone: touch
again until the indicator of a necessary cooking zone
comes on.
• Starting or changing the timer: touch
timer to set the time (
indicator of the cooking zone flashes slower, the time
counts down.
• Stopping the timer: select the cooking zone with
and touch
time counts backwards to
cooking zone goes out.
• Checking the remaining time: select the cooking zone
with . The indicator of the cooking zone flashes
faster. Display shows the remaining time.
When the time elapses, the sound operates and
flashes. The cooking zone switches off.
• Stopping the sound: touch
You can use the timer as a minute minder while cooking
zones do not operate. Touch
timer to select the time. When the time elapses, the sound
operates and
at the same time to switch off the
2 3 4 5 6
00 99
- minutes). When the
to switch off the timer. The remaining
00
. The indicator of the
. Touch
00
flashes.
7 8 9
again and
or of the
00
or of the
7