Getting Started - VTech Toot-Toot Friends 2-in-1 Fire Station Parents' Manual

WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy and should be discarded for your child's safety.
NOTE
Please keep this Parent`s Guide as it contains important information.
Removing the Packaging Locks:
Note: Please cut and discard the plastic
tie between the door and the front of the
Fire Engine before playing with the unit.
This plastic tie is not part of the product
and should be discarded for your child's
safety.

GETTING STARTED

Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on
the bottom water cannon and use a
screwdriver to loosen the screw and
open the battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the battery
box.
5. Replace the battery cover and tighten the screw to secure.
Rotate the packaging locks anticlockwise 90
degrees.
Pull out the packaging locks and discard.
4