Sharp XL-UH240W Operation Manual page 28

Timer and sleep operation (Remote Control only) (continued)
XL-UH240W
ENGLISH
4
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
5
Press the or
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
6
Press the or
then press the MEMORY button.
7
Set the time to finish as in steps 5 and 6 above.
E-27
8
or button to
button to adjust the hour and
9
10
button to adjust the minutes and
03/12/17
Switch input with the or
press the MEMORY button.
To select the timer playback source: CD, TUNER, USB or
AUX.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY
button.
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be cancelled.
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
Continued to the next page
XL-UH240W 26-34.fm
button, and then