Table of Contents
Advertisement
Operating Sequence
Before using your tumble dryer for the first time, we
recommend to place a few damp cloths inside the
appliance and dry for approximately 20 minutes.
There may be dust inside a brand new tumble dryer.
1. Load the laundry
Open the door by pressing the relevant button.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught between
the door and filter.
P0871
2. Select the drying time or the
drying programme
Turn the selector dial to the desired programme or
time, the mains-on light illuminates.
M0027
3. Select the required options
Depress Buzzer Off and/or Low Temp. Button, if you
have to dry synthetics with a timed programme.
L O W
BUZZER
TEMP
O F F
4. Start the machine
Depress START button, the machine starts operating.
To change a programme already in progress, turn
the selector dial to "0", select the new programme
and then depress START button.
START
P0918S
5. When drying is completed
The machine stops automatically. The control lights
and
are flashing.
Release the button(s).
Turn the selector dial to "0", the mains-on light and
control lights go out.
Anticrease phase
If you do not remove the laundry at the end of the
programme, the machine will automatically carry out
an "anticrease" phase for approx 30 mins. During
this period the drum will rotate at regular intervals to
avoid creasing and the buzzer will sound for 1 second
every 10 seconds, unless you have depressed the
BUZZER OFF button. The lights
flash alternatively.
Empty the water reservoir and clean the filter
after every drying programme.
A clean filter ensures correct functioning of the
appliance.
8
and
will
Advertisement
Table of Contents
