Operating Sequence; Loading The Laundry; Selecting The Programme; When Drying Is Complete - Zanussi TD163 Instruction Booklet

OPERATING SEQUENCE
1. Loading the laundry
• Open the door by pulling it outwards
• Load the items one at a time, shaking
them out loosely.
• Where possible mix the load, i.e. large
and small items.
• Close the door.
• Dry your hands and plug in the
appliance.
2. Selecting the programme
• Select the temperature
• Select the required drying time
Use the programme guide to help you
select the correct drying time and
temperature.
The machine will now start working
and rotate in a clockwise direction.
• To lengthen or shorten a timed
programme, turn the time selector dial
until the correct time is reached, bearing
in mind that during the last 12 minutes
the dryer carries out the cooling phase.
3. When drying is complete
• The machine stops automatically
• Remove the laundry
• Switch off the machine
I There is an automatic 12 minute cool
down period at the end of every cycle,
during which the heater is switched off.
This helps to minimise creasing,
A\
Never switch the dryer off and leave a
hot load in the drum.
The filter must be cleaned after every
drying programme.
We recommend the machine is disconnected
from the electricity supply when not in use.
6