Editing; Normal Edit - Kenwood CD Series Instruction Manual

Editing

The follow ing procedure allow s to record a CD w ithin the
specified tape length so that no music is interrupted in the
20
middle at the ends of sides A and B.
Normal EDIT: Edit from one disc.
M ULTI EDIT: Edit and record from several discs.
Preparation

Normal EDIT

1
Light the "EDIT" indicator.
2
Select the disc.
3
Enter the recording time of the tape.
1
Downloaded from: http://www.usersmanualguide.com/
÷ Load a disc in the CD player.
÷ Check that the unit is in the normal play
TRACK mode.
Do this operation in the stop mode.
EDIT
Go to step 2 w ithin 8 seconds.
If more than 8 seconds have elapsed,
press the key again.
DISC 1 DISC 2 DISC 3 DISC 4
Go to step 3 w ithin 8 seconds.
When using the numeric keys:
M ain unit Remote control unit
4 ¢
1 2
4 5
7 8
«
0
EDIT
When using the TIM E DISPLAY key:
2
Select the time. Set the entry.
EDIT
TIM E DISP.
\
REM OTE CON TROL UN IT
RC-P0 6 0 1
!
: Keys and controls used in the operations described on this page.
CD-206/ DPF-R6010
E D
CD-204/ 203/ DPF-R4010/ R3010
DISC 5
Press the numeric keys as show n below .
30-minute tape : 000)
46-minute tape : 00006
CD-206/ DPF-R6010
E
3
6
CD-204/ 203/ DPF-R4010/ R3010
9
+1 0
÷ The interval length can be adjusted w ith the skip keys 4 and ¢ in
units of one minute (to a maximum of 99 minutes).
÷ If you commit a mistake in time entry, press the P.M ODE key and
restart the procedure from the beginning.
CD-206/ DPF-R6010
÷ By pressing the TIM E DISPLAY key the set time-length intervals w ill
change in this order:
CD-204/ 203/ DPF-R4010/ R3010
÷ By pressing the TIM E DISPLAY key the set time-length intervals w ill
change in this order:
÷ Automatic editing is executed for side A and side B,
CD-2 0 6 / 2 0 4 / 2 0 3 / DPF-R6 0 1 0 / R4 0 1 0 / R3 0 1 0 (En)
Hereafter the illustration of the common parts
on the front panel is of CD-206/ DPF-R6010.
Blinks.
I T D S I C ?
Light up.
M ULTI
PGM
EDIT
1 2 3 4 5
D I T D S I C 3
Blinks.
1 2
6 7
C _ 4 6
"4 6 =5 4 =6 0 =7 4 =9 0 =
"4 6 =5 4 =6 0 =9 0 = - - "
C 4 - 6
3 4 5
8 9 1 0
??
"