Mechanical Design - Siemens RDF310.2/MM Manual

Mechanical design

Setting and operating
elements
Legend
8/14
Siemens
Smart Infrastructure
The thermostat consists of two parts:
· Front panel which accommodates the electronics, the operating elements and the
built-in room temperature sensor
· Mounting base with the power electronics
The mounting base carries on the rear side the screw terminals. It fits on a square
conduit box with fixing centres 60.3mm. The front panel engages in the mounting base
and snaps on.
7
2
5
3
1 Display of the room temperature, setpoints and control parameters
2 Symbol used when displaying the current room temperature
3 Protection mode / fan mode status
Protection mode
AUTO
Auto fan active
Fan speed low, medium, high
4 output is energized (auto mode) / manual cooling mode (manual mode)
output is energized (auto mode) / manual heating mode (manual mode)
5 Comfort mode
6 Buttons for adjusting the setpoints and control parameters
7 Button for changing fan operation and Protection mode ( )
8 Manual heating/cooling changeover (
Flush-mounted Room Thermostat
8
1
6
)
4
CB1N3066en
2019-10-25