Product overview
2
Mechanical design
2.4 Mechanical design
2.5 Diagrams
2.5.1 Connection terminals
6 | 29
Siemens Industry, Inc.
Building Technologies
1
Gasket for panel mounting
2
Base plate with:
●
screw holes for all common conduit
boxes
●
gaining channels for wiring from center,
up, or bottom
3
Room operator unit
KNX PL-Link plug
Connector
To find the location of the KNX PL-Link plug, refer to the Mechanical design .
NOTICE! You can choose either pair of pins to connect.
4
KNX PL-Link bus connector
5
Jack connector for tool connection
Pin
Description
+
KNX PL-Link (positive)
-
KNX PL-Link (negative)
A6V10958126_en--_a
2017-06-30