Mechanical Design; General - Siemens RDF301 Basic Documentation

1
RDF301, RDF600KN
RDF301.50,
RDF600KN/S
RDF301.50H
88 / 94
Siemens
Building Technologies
7.

Mechanical design

Mechanical design
7.1

General

General
The thermostats consist of 2 parts: The thermostats consist of 2 parts:
∂ Front panel with
Front panel with electronics, operating elements and built electronics, operating elements and built-in room temperature
sensor. .
∂ Mounting base with power electronics
Mounting base with power electronics.
The rear of the mounting base carries the screw terminals. The rear of the mounting base
Slide the front panel in the mounting base and snap on. Slide the front panel in the mounting base and snap on.
2
1
4
3
RDF301.50, RDF600KN/S
1 Operating mode selector 1 Operating mode selector
2 Button for Button for fan operation
3 Buttons to to adjust setpoints and control parameters
4 Four buttons to control KNX actuators via KNX 4 Four buttons to control KNX actuators via KNX S-Mode
(functions: switching, dimming, blind control, 8 (functions: switching, dimming, blind control, 8-bit scene)
5 Four dedicated dedicated buttons for hotel functions (Make Up Room, Do Not Disturb) buttons for hotel functions (Make Up Room, Do Not Disturb)
via KNX S S-Mode (functions: switching)
For operation peration, refer to section 4.3.
RDF301, RDF301.50..., RDF600KN, RDF600KN/S Basic Documentation RDF301, RDF301.50..., RDF600KN
the screw terminals.
2
1
5
4
3
ocumentation
2
5
3
RDF301.50H RDF301.50H
CE1P3171en
2017-12-07