Maintenance; Preventative Maintenance; Supplied Tool Kit; Clean Gun Surface - Graco Fusion AP Instructions Manual

Maintenance

Maintenance

Preventative Maintenance

Recommended
Schedule
Daily
Weekly
As Needed

Supplied Tool Kit

• Hex nut driver, 5/16
•

Screwdriver, 1/8 blade

• Nozzle drill bit. Various sizes depending on nozzle
size.
• Impingement port drill bit, various sizes depending
on port size. See T
ABLE
• 117661 pin vise, dual reversible chucks
Reversible
TI3864a
• 551189 grease gun, with 3 oz grease
• 15B817 flush manifold (not included with spatter
spray gun).
22
Flush Gun, page 20.
Clean Mix Chamber Nozzle, page 23.
Clean Air Cap, page 23
Inspect the Mix Chamber and Side Seal Cartridges, page 24. Check o-rings.
Inspect the Check Valves, page 26. Check o-rings and filters.
Inspect the Piston Safety Lock, page 26.
Inspect the Check Valves, page 26.
Clean Impingement Ports, page 23.
Lubrication, page 24
1, page 23.
Reversible
Maintenance Procedure

Clean Gun Surface

Keep gun clean with accessory gun cover.
Applying a light coat of lubricant will make cleaning
easier.
Wipe off outside of gun with compatible solvent.
Use N Methyl Pyrrolidone (NMP), Dynaloy
Dynasolve CU-6, SB Versaflex-brand Dzolv
equivalent to soften cured material.
®
-brand
®
, or
309550ZAP