Siemens 1FK7 Series Operating Instructions Manual page 22

Preparing for use
4.2 Transport and storage
Transporting and lifting the motor using its eyebolts
In the case of larger motors, eyebolts are attached to the bearing end shields or threads to
attach eyebolts.
 Eyebolts must be screwed in completely and secured by hand (approx. 8 Nm); do not
 Do not use deformed or damaged eyebolts.
 Do not remove the laminated fiber washers
 Loads applied transversely to the plane of the eyebolt are not permitted.
 The motor must only be lifted at the eyebolts at the bearing end shields. It is not
Figure 4-1
20
WARNING
overtighten.
permissible to attach eyebolts to the shaft extension.
Lifting and transporting the motor using slings
Synchronous Motors 1FK7
Operating Instructions, 03/2011, 610.40700.40c