Snapper XD Series Owner's Manual page 27

BATTERy & CHARGER MAINTENANCE
ChaRGER MOUnTinG
1. This charger can be installed hanging on a wall using two #8 screws (not included).
2. Locate the placement for the charger to be wall mounted.
3. If fastening to wood studs use 2 wood screws (not included).
4. Drill two holes 4.5 in. apart ensuring that they are vertically aligned.
5. If fastening to drywall use wall anchors (not included) and screws to secure the charger to
the wall.
NOTE: If the battery and the charger won't be used for a long time, please remove the battery from the charger
and pull out the AC power plug.
27