Table of Contents
Advertisement
SET MENU
15 6CH INPUT SET
Use this feature to set the direction of the signals input
into the center and subwoofer channels when the source
component is connected to the 6CH INPUT jacks.
I 15A CENTER to (direction of the
center channel signals)
This item sets the direction of the signals input into the
CENTER jack.
Choices: CENTER, MAIN
Initial setting: CENTER
CENTER
The input signals are output from the center speaker.
MAIN
The input signals are directed to the main L/R speakers
with same level.
I 15B SWFR to (direction of the
signals input into the subwoofer)
This item sets the direction of the signals input into the
SUBWOOFER jack.
Choices: SWFR, MAIN
Initial setting: SWFR
SWFR
The input signals are output from the subwoofer.
MAIN
The input signals are directed to the main L/R speakers
with same level.
68
16 ZONE2 SET
(U.S.A., Canada and Australia models only)
Use this feature to make a setting for audio output to
ZONE 2 OUT.
I OUTPUT VOL (output volume)
This item changes the volume control setting for audio
output to ZONE 2 OUT.
Choices: VAR., FIX
Initial setting: VAR.
VAR.
To adjust the ZONE 2 OUT volume with VOL +/– on the
remote control.
FIX
To fix the ZONE 2 OUT volume to the volume level of
this unit.
I SP OUT
Use this feature to switch assignment of the center and
rear center speakers' ouput destination.
Choices: OFF, ON
Initial setting: OFF
ON
To assign the amplifier outputs for the center and rear
center channels to the ZONE 2 OUT SPEAKERS
terminals.
OFF
To assign the amplifier outputs for the center and rear
center channels to CENTER and REAR
CENTER speaker terminals as normal operation.
y
• When SP OUT is set to ON, 1A CENTER SP and 1D REAR
CT SP will be automatically set to NONE. When it is switched
to OFF, 1A CENTER SP and 1D REAR CT SP will be set to
the previous setting.
Note
• When SP OUT is set to ON, it is not necessary to connect
ZONE 2 OUT jacks.
Hide quick links:
Advertisement
Table of Contents
