Selecting A Sound Field Program - Yamaha RX-V2300 Owner's Manual

BASIC PLAYBACK

Selecting a Sound Field Program

You can enhance your listening experience by selecting a
DSP program. There are 11 programs with sub-programs
available with this unit. However the selection depends on
the input signal format and not all the sub-programs are
possible for all input signal formats. For details about
each program, see pages 33 to 37.
NATURAL SOUND AV RECEIVER RX-V2300
STANDBY
/ON
6CH INPUT MODE
SOURCE PRESET/
/REMOTE A/B/C/D/E TUNING
DVD MD/TAPE
D–TV/LD CD–R
SPEAKERS BASS PROCESSOR
CBL/SAT TUNER
A B EXTENSION DIRECT
VCR 1 CD
VCR2 STEREO PROGRAM
/DVR PHONO
V–AUX
EFFECT
REC OUT /ZONE 2
2
1
10KEY DSP HALL 1 HALL 2
1 2
ROCK ENTER-
CONCERT TAINMENT
5 6
MOVIE MOVIE
EX/ES THEATER 1 THEATER 2
9 10
CHP/INDEX 0
A/B/C/D/E PRESET
TV INPUT
TV VOL CH
TV MUTE
DISC
1
Set 10KEY/DSP to DSP on
the remote control.
2
Press PROGRAM l / h (one of the DSP
program buttons on the remote control) to
select the desired program.
The name of the selected program appears on the
front panel display and on the video monitor.
PROGRAM
Front panel
Program name
V AUX VCR2/DVR VCR 1 CBL / SAT D TV / LD
DSP MOVIE THEATER 1
PRO LOGIC /
SP
96 Hz / 24Bit A
K
Sub-program name
30
VOLUME
D I G I T A L
PRESET TUNING
/TUNING FM/AM MEMORY MODE BASS TREBLE
EDIT MAN'L/AUTO FM AUTO/MAN'L MONO
PHONES S VIDEO VIDEO L AUDIO R OPTICAL
SILENT VIDEO AUX
– + –
2,3
CHURCH JAZZ CLUB
3 4
MUSIC TV
VIDEO THEATER
7 8
/DTS
SUR. SELECT
11 12
+ +
10 100
MUTE
VOLUME
STEREO
EFFECT
10KEY DSP
10KEY DSP HALL 1 HALL 2 CHURCH JAZZ CLUB
1 2 3
ROCK ENTER- MUSIC
CONCERT TAINMENT VIDEO THEATER
5 6 7
or
MOVIE MOVIE /DTS
EX/ES THEATER 1 THEATER 2 SUR. SELECT
9 10 11
CHP/INDEX 0 + 10 +
Remote control
DVD MD / TAPE CD R TUNER CD PHONO
3
After selecting the desired program, press
the same button repeatedly to select the
desired sub-program if available.
For example, to select the sub-program "70 mm
Sci-Fi", press MOVIE THEATER 1 repeatedly.
Program name
V AUX VCR2/DVR VCR 1
+ DSP
PRO LOGIC /
SP
A
Notes
• When you select an input source, this unit automatically selects
the last DSP program used with that source.
• When you set this unit in the standby mode, the current source
and DSP program are memorized and are automatically
selected when you turn on the power again.
• If a Dolby Digital or DTS signal is input when the input mode
is set to AUTO, the DSP program (No. 9–11) automatically
switches to the appropriate decoding program.
• When a monaural source is being played with PRO LOGIC/
Normal or PRO LOGIC/Enhanced, PRO LOGIC
Neo: 6 Cinema, no sound will be heard from the main speakers
and the rear speakers. Sound can only be heard from the center
speaker. However, if "1A CENTER SP" on the SET MENU is
set to NONE, the center channel sound is output from the main
speakers.
• When a source connected to the 6CH INPUT jacks of this unit
is selected, the digital sound field processor cannot be used.
• When 48-kHz sampling digital signals are input to this unit, the
4
TV
DSP program cannot be selected. In this case, the sound is
8
reproduced as normal 2-channel stereo.
12
100
y
• Choose a DSP program based on your listening preference, and
not on the name of the program. The acoustics of your listening
room affect the DSP program. Minimize the sound reflections
in your room to maximize the effect created by the program.
VOLUME
L R
10KEY DSP HALL 1 HALL 2 CHURCH JAZZ CLUB
1 2 3 4
ROCK ENTER- MUSIC TV
CONCERT TAINMENT VIDEO THEATER
5 6 7 8
MOVIE MOVIE /DTS
EX/ES THEATER 1 THEATER 2 SUR. SELECT
9 10 11 12
CHP/INDEX 0 + 10 + 100
CBL / SAT D TV / LD DVD MD / TAPE CD R TUNER CD
MOVIE THEATER 1
Sub-program name
PHONO VOLUME
L R
Movie, or