Yamaha R-V303 Owner's Manual page 28

Adjustment of the CENTER LEVEL
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on page 17.
Note
This adjustment is useful only when the digital sound field
program PRO LOGIC or
Adjustment of the REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on page 17.
Note
This adjustment is useful only when the digital sound field
program PRO LOGIC, ROCK or HALL is selected.
26
CENTER
LEVEL
0 l0
3 STEREO is selected.
REAR
LEVEL
0 l0
Adjustment of DELAY TIME
You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
effect sound from the rear speakers.
The larger the value, the later the effect sound is generated.
This adjustment can be made to all programs (except
STEREO) individually.
Control range
: 15, 20, 25, 30 milliseconds
Preset value
PRO LOGIC: 25 milliseconds
HALL: 20 milliseconds
ROCK: 15 milliseconds
This adjustment can be made only by using the remote control
transmitter.
+
— DELAY TIME
Notes
When 3 STEREO is selected, this adjustment cannot
be made.
Adding too much delay will cause an unnatural effect with
some sources.
The value of the delay time you last set will remain
memorized even when this unit is in the standby mode.
However, if the power cord is kept disconnected for more
than one week, these values will be automatically changed
back to the original factory settings.
When the DELAY TIME key is pressed, the sound may be
momentarily interrupted.
3
ms
FM
NORM WIDE
Adjustable
20