Resetting The Factory Presets - Yamaha YSP-1 Owner's Manual

If you want to reset all of your unit's parameters for any
reason, do the following. This procedure completely resets
ALL the parameters in SET MENU.
Note
After performing the following procedure you must reset the
ROOM TYPE, SP POSITION and ROOM SIZE parameters to
match your surround sound environment.
Be sure this unit is in standby mode.
INPUT VOLUME
+ +
1
Hold down INPUT on the front panel and
press STANDBY/ON.
"FACTORY PRESET" appears in the front panel
display.
While holding
INPUT
down, press
y
To cancel the initialization procedure without making any
changes, press STANDBY/ON.
2
Release INPUT.
INPUT

RESETTING THE FACTORY PRESETS

STANDBY/ON
STANDBY/ON
VOL
RESETTING THE FACTORY PRESETS
3
Press INPUT once more.
"RESET" appears in the front panel display.
To cancel without making any changes, press INPUT
again to display "Cancel".
INPUT
4
Press STANDBY/ON to confirm your
selection.
If you selected "Reset", the unit is reset to its factory
presets and switches to standby mode.
If you selected "Cancel", the unit switches to standby
mode and nothing is reset.
STANDBY/ON
Reset
Cancel
57