Yamaha RX-V757 Owner's Manual page 78

ADVANCED SETUP MENU
ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Speaker impedance SP IMP.
Use to switch the speaker impedance for this unit.
Choices: 8 Ω MIN, 4 Ω MIN
• Select 8 Ω MIN to set the speaker impedance to 8 Ω.
• Select 4 Ω MIN to set the speaker impedance to 4 Ω.
SP IMP. Speaker
Front
4 Ω ΜΙΝ
Center
Surround
Surround back
Front
8 Ω ΜΙΝ
Center
Surround
Surround back
• The Canada model cannot use two separate speaker systems
(A and B) simultaneously when SP IMP is set to the 8 Ω MIN
position.
Factory presets PRESET
Use to reset all parameters to the factory presets (see
page 98).
Choices: CANCEL, RESET
• Select CANCEL if you do not want this unit's
parameters to be initialized when you reset the factory
presets.
• Select RESET if you want all of this unit's parameters
to be initialized when you reset the factory presets.
Note
This setting does not affect ADVANCED SETUP menu item
parameters.
Remote REMOTE
Use to switch the ID for the remote control of this unit.
Choices: ID1, ID2
• Select ID1 to operate this unit using the default code.
• Select ID2 to operate this unit using an alternative
code.
74
Impedance level
If you use one set (A or B),
the impedance of each
speaker must be 4 Ω or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8 Ω or
higher.
The impedance of each
speaker must be 6 Ω or
higher.
If you use one set (A or B),
the impedance of each
speaker must be 8 Ω or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16 Ω or
*
higher.
The impedance of each
speaker must be 8 Ω or
higher.
Note
You must also make settings for the remote control (see page 76).
< Asia and General models only >
Tuner TU
Use to switch the frequency step selection according to the
frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• North, Central and South America:
AM10/FM100 (kHz)
• Other areas: AM9/FM50 (kHz)