To Play A Source With The Digital Sound Field Processor - Yamaha RX-V592RDS Owner's Manual

To play a source with the digital sound field processor

: Provided for RX-V692RDS only.
1
Follow steps 1 – 6 shown in "BASIC OPERATIONS" on
page 25.
2
Select the desired program that is suitable for the
source.
PRO LOGIC
RX-V692RDS
PRO LOGIC
WIDE
The selected program name is shown on the display.
3
If desired, adjust the delay time and the output level of
each speaker. (For details, refer to the corresponding
descriptions on page 40 and 41.)
Notes
Program selection can be made to individual input sources.
Once you select a program, it is linked with the input source
selected at that time. So, when you select the input source
next time, the same program is automatically called.
If you prefer to cancel the DSP, press the EFFECT button.
The sound will be the normal 2-channel stereo without
surround sound effect.
RX-V692RDS only
When STADIUM, DISCO, ROCK CONCERT, JAZZ CLUB,
CHURCH or CONCERT HALL is selected, no sound is
heard from the center speaker.
RX-V592RDS only
When CONCERT VIDEO, MONO MOVIE, DISCO,
STADIUM, ROCK CONCERT or CONCERT HALL is
selected, no sound is heard from the center speaker.
2
l6
20 l2
28 8
40 4
2
60
0
–dB
ENHANCED
RX-V592RDS
PRO LOGIC
RX-V692RDS
VCR
A DIR B
B
STOP DISC
DVD/LD
TV/DBS
C
PRESET A/B/C/D/E
70 mm
PRO LOGIC ENHANCED MOVIE THEATER
1 2 3 V-AUX
2
TV
SPORTS STADIUM DISCO
PHONO
4 5 6
ROCK JAZZ CLUB CHURCH
7 8 9 EFFECT
ON/OFF
+1 0
HALL TEST
0
TIME/LEVEL
DELAY
CENTER
REAR
SWFR
S EEP 2CH/6CH
When a monaural sound source is played with DOLBY PRO
LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is
heard from the main speakers and the rear speakers.
Sound is heard only from the center speaker. However, if
the center channel mode is in PHANTOM, the main
speakers output the sound of the center channel.
When this unit's Dolby Pro Logic Surround decoder is used,
if the main-source sound is considerably altered by
overadjustment of the BASS or TREBLE control, the
relationship between the center and rear channels may
produce an unnatural effect.
RX-V592RDS only
To select a DSP program on the remote control transmitter,
first turn the DSP on so that a program name lights up on
the display by pressing the EFFECT key. Next, select a
desired DSP program by pressing the
PROGRAM key.
EFFECT
ON/OFF
* Pressing the PROLOGIC or ENHANCED key turns
the DSP on and selects the corresponding program
directly.
RX-V592RDS
TIME/
DELAY/CENTER
– +
LEVEL TEST EFFECT
/REAR/SWFR
ON/OFF
PROGRAM PROLOGIC ENHANCED
V–AUX VCR TV/DBS DVD/LD 2CH/6CH
DIR A DIR B REC/PAUSE PLAY
TAPE
A/B
– +
A/B/C/D/E TUNER
PRESET
PLAY
DISC
CD
PHONO
POWER VOLUME
SLEEP
or side of
PROGRAM
PROLOGIC ENHANCED
2
39