Sound Field Program Parameter Editing; Changing Parameter Settings - Yamaha RX-V440RDS Owner's Manual

SOUND FIELD PROGRAM PARAMETER EDITING

Changing parameter settings

The initial sound field program settings will provide you
with an excellent listening experience as they are. It is not
necessary to alter these settings, but you can create an
original listening environment by doing so.
Note
• The editable parameters vary depending on the sound field
program you select. Refer to the explanation for the parameter.
TV
+
VOL CH
–
MUTE INPUT
HALL JAZZ
1
MUSIC TV THTR
5
/DTS NIGHT
9
LEVEL
TITLE
–
TEST
RETURN
1
Press AMP.
2
Select a sound field program.
HALL JAZZ
1 2
MUSIC TV THTR
5 6
/DTS NIGHT
9 0
3
Press u / d to select the
parameter you want to
change.
4
Press j / i to change the
parameter setting.
50
AMP
1
+ +
VOLUME
– –
MUTE
ROCK ENTERTAINMENT
2
2 3 4
MOVIE1 MOVIE2
6 7 8
6.1/5.1 STEREO
0 +10 ENTER
SET MENU
MENU
3
A/B/C/D/E
+
SELECT
DISPLAY
PRESET/CH 4
AMP
ROCK ENTERTAINMENT
3 4
MOVIE1 MOVIE2
7 8
6.1/5.1 STEREO
+10 ENTER
–
SELECT
PRESET/CH
–
SELECT
PRESET/CH
5
Repeat steps 2 – 4 if you wish to alter other
parameters.
Note
• You cannot alter these parameters if the "OPTION 2 MEM.
GUARD" parameter in the set menu is set to ON. Change this
setting to OFF if you wish to alter any other parameters.
+
+