Recording - Yamaha RX-V440RDS Owner's Manual

Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation .
2
INPUT
STANDBY
/ON
INPUT MODE 6CH INPUT
SILENT
SPEAKERS STEREO PROGRAM A/B/C/D/E
A B
EFFECT
NEXT
PHONES
POWER POWER POWER
TV TV AV
CD MD/CD-R
2
DVD D-TV/CBL
REC
DISC SKIP
TV
+ +
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
INPUT
Front panel
3
Start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.

RECORDING

VOLUME
PRESET/TUNING FM/AM
EDIT
TUNING MODE MEMORY
AUTO/MANUAL MONO MAN`L/AUTO FM
VIDEO AUX
PRESET/TUNING CONTROL BASS/TREBLE
SET MENU
VIDEO L AUDIO R
SYSTEM
STANDBY POWER
TUNER SLEEP
VCR V-AUX
6CH INPUT
AUDIO
CODE SET
AMP
+
CD MD/CD-R TUNER SLEEP
or
DVD D-TV/CBL VCR V-AUX
Remote control
Notes
• Do a test recording before you start an actual recording.
• When this unit is set in standby mode, you cannot record
between the components connected to it.
• DSP programs and volume, bass, and treble settings do not
affect the recorded material.
• You cannot record from a source connected to the 6CH
INPUT jacks on this unit.
• Input sources are not output to the same OUT (REC) channel.
(For example, the signal input from VCR IN is not output to
VCR OUT.)
• Check the copyright laws in your country if you wish to
record from records, CDs, radio, etc. Recording of
copyrighted material may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
I Special considerations when recording
DTS material
The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.
For LDs, DVDs and CDs encoded with DTS, follow the
operating instructions of your player to set it to output an
analog signal, if it is compatible with the DTS format.
39