Selecting A Sound Field Program - Yamaha RX-V440RDS Owner's Manual

Selecting a sound field program

You can enhance your listening experience by selecting a
DSP program. For details about each program, see pages
28 – 30.
INPUT
STANDBY
/ON
INPUT MODE 6CH INPUT
SILENT
SPEAKERS STEREO PROGRAM A/B/C/D/E
A B
EFFECT NEXT
PHONES
PROGRAM l / h
TV
+ +
VOL CH
– –
MUTE INPUT
HALL JAZZ
1 2
MUSIC TV THTR
5 6
/DTS NIGHT
9 0
EVE
1
Press AMP.
2
Press one of the numeric buttons on the
remote control to select the desired
program.
The name of the selected program appears on the
front panel display.
HALL JAZZ
1 2
MUSIC TV THTR
5 6
/DTS NIGHT
9 0
VCR V-AUX
SP
A
Adventure
VOLUME
PRESET/TUNING FM/AM
EDIT
TUNING MODE MEMORY
AUTO/MANUAL MONO MAN`L/AUTO FM
VIDEO AUX
PRESET/TUNING CONTROL BASS/TREBLE
SET MENU
VIDEO L AUDIO R
AMP
1
+
VOLUME
–
MUTE
ROCK ENTERTAINMENT
3 4
2,3
MOVIE1 MOVIE2
7 8
6.1/5.1 STEREO
+10 ENTER
SET MENU
AMP
ROCK ENTERTAINMENT
3 4
MOVIE1 MOVIE2
7 8
6.1/5.1 STEREO
+10 ENTER
D-TV/CBL DVD MD/CD-R TUNER CD
VOLUME
L C R
LFE RL
3
After selecting the desired program, press
the same button repeatedly to cycle through
sub-programs if available.
Example:
HALL
1
MUSIC
5
/DTS
9
VCR
SP
A
Notes
• There are 9 programs with sub-programs available with this
unit. However, the selection depends on the input signal
format and not all sub-programs can be used with all input
signal formats.
• You cannot use the digital sound field processor with a source
connected to the 6CH INPUT jacks of this unit or when the
unit is reproducing a digital source with a sampling frequency
greater than 48 kHz.
• The acoustics of your listening room affect the DSP program.
Minimize the sound reflections in your room to maximize the
effect created by the program.
• When you select an input source, this unit automatically
selects the last DSP program used with that source.
• When you set this unit in standby mode, it stores the current
source and DSP program in memory and automatically selects
them when you turn on the power again.
• If the unit receives a Dolby Digital or DTS signal when the
input mode is set to AUTO, the DSP program (No. 7–9)
automatically switches to the appropriate decoding program.
• When the unit is reproducing a monaural source with PRO
LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie,
no sound is output from the main and rear speakers. Sound can
only be heard from the center speaker. (If "1A CENTER" on
the set menu is set to NON, the center channel sound is output
from the main speakers.)
y
RR
• You can also select DSP program by pressing PROGRAM
l / h on the front panel.
• Select a program based on your listening preference. Program
names are just for reference.
PLAYBACK
Pressing MOVIE 2 repeatedly
switches the sub-program between
"Adventure" and "General".
JAZZ ROCK ENTERTAINMENT
2 3 4
TV THTR MOVIE1 MOVIE2
6 7 8
NIGHT 6.1/5.1 STEREO
0 +10 ENTER
V-AUX D-TV/CBL DVD MD/CD-R TUNER
General
CD
VOLUME
L C R
LFE RL RR
25