Yamaha RX-V395RDS Owner's Manual page 9

Connecting an external decoder for Dolby Digital, DTS and other future formats
or a DVD player, etc.
If you have a separate Dolby Digital, DTS or other format decoder, or if you have a DVD player or other component which
incorporates a Dolby Digital, DTS, or other format decoder, its 6 channel discrete outputs can be connected to the 6CH DISCRETE
INPUT terminals of this unit.
(Example)
75 UNBAL.
FM
ANT
GND
AM
ANT
50kHz
/ 9kHz
100kHz
/10kHz
FM / AM
FREQUENCY
STEP
<General model>
Notes
The laserdisc player (or other unit) must be also connected
to the DVD/LD (or TV/DBS) AUDIO SIGNAL input terminals
of this unit to play a source encoded with Dolby Pro Logic
Surround or in normal stereo (or monaural).
The discrete signals input to this unit cannot be recorded by
a tape deck, MD recorder or VCR. To record a source
played on the laserdisc player (or another unit), it must be
connected to the DVD/LD (or TV/DBS) AUDIO/VIDEO
SIGNAL input terminals of this unit.
6CH DISCRETE OUTPUT
MAIN CENTER SURROUND
SUB
WOOFER
6CH DISCRETE INPUT
MAIN CENTER SURROUND
L L
R
R
SUB
WOOFER
GND VIDEO SIGNAL
MONITOR DVD/LD TV/DBS
OUT IN
AUDIO SIGNAL
PHONO CD TAPE/MD DVD/LD TV/DBS
IN
IN OUT
(PLAY) (REC)
1 4
3
Dolby Digital decoder
VCR
OUT
VCR
OUT
VIDEO OUT
AUDIO OUT
Laserdisc player or other unit with
Dolby Digital RF (AC-3 RF) output
If you made no connection to the SUB WOOFER input
terminal of this unit or you will not use a subwoofer, you
should be able to make a setting on the decoder to
distribute SUB WOOFER channel signals to the right and
left MAIN output terminals.
For details, refer to the owner's manual supplied with the
decoder.
DIGITAL
IN
DIGITAL
OUT
RF Demodulator
DOLBY DIGITAL
RF (AC-3 RF) IN
DOLBY DIGITAL
RF (AC-3 RF) OUT
9