Yamaha RX-V1900BL Owner's Manual page 36

Optimizing the speaker setting for your listening room
6
Press 8 l / h repeatedly to toggle between
the setup result displays.
Press 8 k / n to toggle between the parameters in the
result.
Number of the measured points
Results of the speaker
connection and wiring
Results of the speaker distance
from the listening position
Results of the speaker detection
and size
Results of the parametric
equalizer of each speaker
Results of the speaker output
level
y
• If you are not satisfied with the results or want to manually
adjust each parameter, use "MANUAL SETUP"
(page 74).
• You can select the parametric equalizer type with "PEQ
SELECT" (page 79).
Notes
• The distances displayed in the "DISTANCE" results may
be longer than the actual distance depending on the
characteristics of your subwoofer or external amplifiers if
you connect them.
• In the "EQ" results, different values may be set for the
same band to provide finer adjustments.
32
En
7
Press 8ENTER to return to the top result
display.
AUTO SETUP
RESULT
MLT :
SP
DIST:
LVL : -10.0/+5.0dB
.
>SET
[ ]/[ ]:
[ENTER]:
8
Press 8 l / h to select "SET" or "CANCEL"
and then press 8ENTER.
AUTO SETUP
RESULT
MLT :
SP
DIST:
LVL : -10.0/+5.0dB
.
>SET
[ ]/[ ]:
[ENTER]:
Choices: SET, CANCEL
• Select "SET" to confirm the "AUTO SETUP"
results.
• Select "CANCEL" to cancel the "AUTO SETUP"
results.
9
Disconnect the optimizer microphone or
press H MENU to exit from "SET MENU".
Note
If you change speakers, speaker positions, or the layout of your
listening environment, run "AUTO SETUP" again to recalibrate
your system.
■ If an error screen appears
Press 8 l / h to select "RETRY" or "EXIT" and
then press 8ENTER
The following screen is an example where "E-9:USER
CANCEL" appears in the OSD.
ERROR
E-9:USER CANCEL
Don't operate
any function
. >RETRY
[p]/[[]:
[ENTER]:
Choices: RETRY, EXIT
• Select "RETRY" to retry the "AUTO SETUP"
procedure.
• Select "EXIT" to exit from the "AUTO SETUP"
procedure.
y
• If "E-5:NOISY" appears, you can also select "PROCEED" to
1
: 5/4/0.1
14.0/17.0ft
CANCEL
Up/Down
Enter
1
: 5/4/0.1
14.0/17.0ft
CANCEL
Up/Down
Enter
EXIT
Select
Enter